Introduction of construction technology of floor stamp mold

News 2023年2月9日 166

Floor stamp is also called embossed floor, printed floor, etc., and the tool used to realize this kind of floor is the floor stamping mold, so what material is the floor stamping mold made of?

The floor stamping mold is mainly made of polyurethane raw material, which has certain flexibility and durability, and can realize bending and other deformation processes.

The material of the floor stamping mold determines that the mold has a long service life, usually Can be used repeatedly for up to 10 years.

The floor stamping mold is a new type of floor that carries out color decoration and artistic treatment on the cast-in-place concrete surface through professional molds, professional tools and strict construction technology.

So what is its construction technology?

1. Bottom layer treatment: It should be sorted and compacted to reach the specified compaction density.

2. Pour the concrete in the construction area of the same color and mold type, and smooth it with tools. The slope of the drainage should be considered to avoid water accumulation.

3. Before the initial setting of the concrete, trowel the concrete with a trowel, and spread the color printing material evenly in two to three times on the concrete surface by the spreading method. Work.

4. Spread the release agent evenly on the concrete surface according to the prescribed amount.

5. Arrange the specified mold shape on the concrete surface neatly and set out, and then carry out the imprinting work.

6. Maintain the finished floor. Generally, it can be put into use after 72 hours under the condition of 25℃.

The scope of application of the stamp mold is extremely wide, from indoor to outdoor, from garden landscaping to entertainment, municipal, commercial and cultural facilities and other fields, all of which have been adopted on a large scale. If necessary, welcome to consult.